Function Introduction:A module that outputs pure voltage analog signals from 0-10V, paired with 0-10V execution devices (commonly 0-10V dimming drivers) to achieve personalized control requirements This module can achieve high-quality dimming atmosphere lighting through bus, WIFI, and Apple home control dimming Applicable occasions:Widely applicable to users with human presence detection needs such as homes, office buildings, hotels, banks, hospitals, schools, airports, museums, laboratories, factories, and agriculture. It is also suitable for professionals in equipment manufacturing, robot manufacturing, security manufacturing, and other fields Product parameters:Product features:1. Multiple 0-10V dimming drivers can be connected within the current range. 2. Multiple control modes are supported, including bus, WIFI, Apple home, etc. 3. Pure voltage analog signal, 255 level digital infinite dimming, smooth brightness transition, supporting branch group control, quickly achieving personalized scene control needs 5. Supports 25 dimming curves and can be adapted to various lighting fixtures to achieve a gradual on/off effect of light brightness 6. Support industrial Modbus control protocol and connect to industrial control systems for usage:1. The indicator light flashes at a frequency of 1 second when powered on, indicating successful connection to the server. It stays on for 5 seconds and then turns off for 1 second;The indicator light will turn off when entering the distribution network mode. If the configuration is successfully restored to a 1-second frequency flash or on for 5 seconds, turn off for 1 second. If entering the Homekit configuration mode, the indicator light will remain on. If entering the working mode, restore to a 1-second frequency flash or on for 5 seconds, turn off for 1 second 2. Address modification: After powering on the device, send the module address, Homkit connection password, and Modbus slave address (ASC encoding format is used because HEX cannot display letters). For example, if the address is 1A 13 24 56 91, use XX XX XX XX XX to replace it. Change the address and select HEX to send:XX XX XX XX XX (old address) F8 E7 D6 (fixed) XX XX XX XX XX XX XX (new address) feedback:Feedback on successful operation BC BC example:1A 13 24 56 91 F8 E7 D6 2A 33 57 26 81 Change old address 1A 13 24 56 91 to new address 2 A 33 57 26 81. 3. Group centralized control 4. Power on status configuration 5. Protocol control example 6. Status query instruction 7. Output curve setting protocol 8. Query curve dimming configuration protocol 9. Output initial brightness 10. Query initial brightness value 11. Respiratory output mode configuration 12. Single time delay switch protocol Modbus protocol:Connect to Apple Home App 1, connect your phone to the local area network WIFl, and use the 485 serial assistant to select ASC encoding to send the command "HKTRST":1 2. Search and follow the official account Anson, and click HKT distribution network 3. Enter the password for the current WiFi and receive a notification that the network connection has been successfully registered:Apple phones may experience WeChat network configuration failure prompts, Please use an Android phone for network distribution WIFI To use this product for network control, please contact us! ! !
Leave a Reply