MODBUS ATS03 tilt sensor - ± 90 ° three-axis gyroscope/Kalman filter/IP65 protection/HA safety monitoring

freeFree Technical Resource

This content is free to read, suitable for basic learning and search traffic.

MODBUS ATS03 tilt sensor - ± 90 ° three-axis gyroscope/Kalman filter/IP65 protection/HA safety monitoring缩略图

Product Overview

MODBUS ATS03is a high-precision three-axis tilt sensor based on MEMS three-axis gyroscope and accelerometer, usingKalman filtering algorithmto achieve stable and reliable data output. It can measure the X-axis and Y-axis tilt angles of objects relative to the horizontal plane (within a range of ± 90 °), and output angle data through RS485 Modbus RTU. IP65 protection level, working in a wide temperature range of -40 ° C to 80 ° C, suitable for harsh scenarios such as outdoor tower tilt monitoring, engineering machinery attitude control, bridge and tunnel deformation monitoring, etc.

Kalman Filter

Traditional tilt sensors experience significant reading fluctuations in vibration environments. ATS03 has a built-in Kalman filter that combines the dynamic response of the gyroscope with the static accuracy of the accelerometer, and can still output stable angle values under vibration, impact, and temperature changes.

Core parameters

  • Measurement axis: X-axis (pitch)+Y-axis (roll), biaxial ± 90 °
  • Resolution: 0.01 °
  • Accuracy: ± 0.1 ° (static), ± 0.5 ° (dynamic)
  • Communication: RS485 Modbus RTU
  • Protection: IP65
  • Operating temperature: -40~80 ° C
  • Power supply: DC 5-36V

HA safety monitoring scenario

  • Tower/pole tiltInstalled on the transmission tower, tilting exceeds the threshold → alarm "XX tower tilted XX degrees"
  • Solar panel trackingInstalled on the solar tracking bracket, feedback panel pitch angle
  • Bridge health monitoringMultiple ATS03s are distributed on bridge piers and decks to monitor bridge deflection and tilt
  • Tower crane safetyMonitor the inclination of the tower crane body and emergency stop if it exceeds the standard
  • Geological hazard warningInstalled on mountain slopes to monitor the trend of landslide inclination changes

🛒 Purchase and Consultation

The MODBUS products introduced in this article can be purchased through official channels.

📍 Modbas Intelligence|12th Floor, Tower A, Langqing Plaza, Guanyin Bridge, Jiangbei, Chongqing, China
📞 Phone:+86-18801054468
📧 Email: iot@modbus.com | 🌐 Official website:www.modbus.cn
📱 Search for "Modbus Debugging Assistant" on WeChat Mini ProgramModbus Debugging Assistantto learn more about product information

Put this resource to use in a real project?

Go to the Tool Center for message parsing, CRC verification and device debugging, or submit your requirements for selection and integration advice.

Engineer Membership

Turn this article into actionable debugging resources

After activation, you can use advanced message parsing, resource pack downloads, code examples, engineering cases and priority technical support, suitable for real project delivery.

Unlimited Advanced Tools
Resource & Code Packs
Complete Engineering Case Library
Priority Technical Support

Leave a Reply

Your email address will not be published. Required fields are marked *.