GL-2ME3 3-Port Ethernet Serial Server: 2 RS232/485 Ports with Self-Organizing Ethernet

freeFree Technical Resource

This content is free to read, suitable for basic learning and search traffic.

GL-2ME3 Product Overview

GL-2ME3是深圳市一天广联科技有限公司推出的3网口串口服务器,集成2个RS232/485通用串口,支持串口设备通过以太网联网。产品采用3网口设计,支持手拉手级联组网,可将传统串口设备快速接入以太网,实现远程数据采集和设备管理。

GL系列产品支持Modbus多主机Cloud Gateway Function,通过云服务器(独享公网IP)可实现分控中心组态软件、手机APP等多端同时访问现场设备,具备设备管理、主机、下位机鉴权功能。产品支持多网口手拉手级联组网,单台电脑主机可通过以太网级联连接多台GL系列产品,实现大规模IO点的集中采集和控制。

Key Features

  • 3网口设计:3个以太网口,支持手拉手级联组网,无需额外交换机
  • 2个通用串口:2个RS232/485通用串口,可灵活配置为RS232或RS485模式
  • 串口联网:将传统串口设备转换为以太网设备,实现远程访问和管理
  • ModbusProtocol:支持Modbus TCP/RTUProtocol,与主流工业设备无缝对接
  • Cloud Gateway Function:支持Modbus多主机云网关,远程访问无需公网IP和VPN
  • 工业级设计:工业级设计,导轨安装,Building control

Hardware Configuration

serial port2个RS232/485通用串口,可配置
Ethernet3个10/100M以太网口
ProtocolModbus TCP/RTU
Network Topology3网口手拉手级联
云功能Modbus多主机云网关,支持远程访问
Installation method导轨安装或金属背板固定
供电DC8~36V宽压供电

Network Topology

产品支持多网口手拉手级联组网,电脑主机通过以太网连接第一台设备的网口1,第一台设备的网口2连接第二台设备的网口1,以此类推。每台设备的额外网口可连接更多设备,实现大规模扩展。支持Modbus TCP/RTUProtocol,可与PLC、HMI触摸屏、组态软件等主流工业设备无缝对接。

Cloud Gateway Function

配合云服务器和Modbus多主机云网关软件,可实现远程访问现场设备。分控中心组态软件、手机APP等多端可同时访问,具备设备管理、主机鉴权、下位机鉴权功能,保障设备访问安全。无需公网IP和VPN,即可实现远程监控和控制。

Typical Applications

  • 串口设备联网:传统RS232/485设备快速接入以太网
  • 工业数据采集:多台串口设备级联组网,集中采集数据
  • 远程设备管理:通过云网关远程访问和管理现场设备
  • 楼宇自动化:楼控系统中串口设备的网络化改造
  • power monitoring:电力仪表等串口设备的数据集中上传
Put this resource to use in a real project?

Go to the Tool Center for message parsing, CRC verification and device debugging, or submit your requirements for selection and integration advice.

Engineer Membership

Turn this article into actionable debugging resources

After activation, you can use advanced message parsing, resource pack downloads, code examples, engineering cases and priority technical support, suitable for real project delivery.

Unlimited Advanced Tools
Resource & Code Packs
Complete Engineering Case Library
Priority Technical Support

Leave a Reply

Your email address will not be published. Required fields are marked *.