MODBUS PD102 two-way 0-10V dimming speed regulation module - bus/WiFi/Apple HomeKit the third mock examination control

freeFree Technical Resource

This content is free to read, suitable for basic learning and search traffic.

MODBUS PD102 two-way 0-10V dimming speed regulation module - bus/WiFi/Apple HomeKit the third mock examination control缩略图

Product Overview

MODBUS PD102is a dimming and speed regulation module with two channels of 0-10V analog voltage output. It is used in conjunction with 0-10V LED dimming driver or 0-10V fan speed regulator to achieve stepless dimming of lights or stepless speed regulation of fans. The module supports three control methods: RS485 bus control, WiFi wireless control, and Apple HomeKit control. It can be flexibly deployed in distributed dimming systems or centralized dimming systems.RS485 bus control, WiFi wireless control Apple HomeKitThree control methods that can be flexibly deployed in distributed dimming systems or centralized dimming systems.

Three Control Modes

Control ModesCommunication ProtocolApplicable Scenarios
RS485 BusModbus RTUConnected to Modbas Central Control or Third Party Bus System
WiFi ControlTCP/HTTPDirectly controlled through mobile app or HA
Apple HomeKitHAP protocolApple home app, supports Siri voice

Core parameters

  • Output channel: 2-channel independent 0-10V analog
  • Output voltage accuracy: ± 1%
  • Power supply: DC 12-24V
  • Installation method: DIN rail installation (back card optional)
  • Protection function: overcurrent/overvoltage/anti reverse connection/anti lightning surge

Modbus control instruction

Use function code 03/06/10 to read and write registers. Typical operations include reading the current brightness value (03 00 00 00 02 CRCH/CRCL) and setting channel 1 brightness to 50% (06 00 00 00 7F CRCH/CRCL). Provide a complete Modbus protocol table document.

Application Scenarios

  • 0-10V LED dimmingCombined with 0-10V LED driver power supply, achieve smooth dimming
  • Fan speed regulationControl the speed of EC fan
  • Electric valve controlOutput 0-10V signal to control proportional integral valve

🛒 Purchase and Consultation

The MODBUS products introduced in this article can be purchased through official channels.

📍 Modbas Intelligence|12th Floor, Tower A, Langqing Plaza, Guanyin Bridge, Jiangbei, Chongqing, China
📞 Phone:+86-023-65218879 | Duty phone:+86-17723047591
📧 Email: admin@modbus.com | 🌐 Official website:www.modbus.cn
📱 Search for "Modbus Debugging Assistant" on WeChat Mini ProgramModbus Debugging Assistantto learn more about product information

Put this resource to use in a real project?

Go to the Tool Center for message parsing, CRC verification and device debugging, or submit your requirements for selection and integration advice.

Engineer Membership

Turn this article into actionable debugging resources

After activation, you can use advanced message parsing, resource pack downloads, code examples, engineering cases and priority technical support, suitable for real project delivery.

Unlimited Advanced Tools
Resource & Code Packs
Complete Engineering Case Library
Priority Technical Support

Leave a Reply

Your email address will not be published. Required fields are marked *.