Modbus Breathing Fluctuations and Human Movement Sensor Product Manual

freeFree Technical Resource

This content is free to read, suitable for basic learning and search traffic.

Modbus Breathing Fluctuations and Human Movement Sensor Product Manual缩略图
Modbus Breathing Fluctuations and Human Movement Sensor Product Manual插图

The JF04 mini presence sensor uses 24GHz millimeter wave radar and FMCW radar detection and algorithm to detect dynamic situations by measuring the frequency difference between the transmitted signal and the reflected signal. Being able to identify and determine the dynamic changes in the chest and abdomen during breathing, thereby achieving accurate human presence detection.
The JF05 mini high-altitude microsensor uses a high ceiling radar chip to transmit and receive high-frequency radar signals, which are processed by algorithms. Even at heights of 2 to 12 meters, it can sensitively detect small movements and motion states of the human body. This includes but is not limited to nodding, shaking, waving, raising hands, small body movements, using smartphones, flipping through books, as well as movement states such as walking, brisk walking, jumping, spinning, and running.

Functional Overview

Using 24GHz millimeter wave radar and FMCW radar detection and algorithm, dynamic situations are detected by measuring the frequency difference between the transmitted signal and the reflected signal.

Selection Suggestions

is widely applicable to scenarios that require human detection, such as homes, office buildings, hotels, banks, hospitals, schools, airports, museums, laboratories, factories, etc. It is also suitable for professionals such as weak current integrators and smart home solution engineers.

JF04 Parameters

Modbus Breathing Fluctuations and Human Movement Sensor Product Manual插图1

JF05 Parameters

Modbus Breathing Fluctuations and Human Movement Sensor Product Manual插图2

Functions

1. The sensor is currently the smallest embedded sensor,
2. The workmanship details are good with a frosted surface, and it is installed in the ceiling by default.
3, 12-30V wide voltage supply.
4, It can be connected to the host through Modbus protocol or actively sending protocol. There are wall mounted and suspended ceiling hidden installation accessories to meet various installation needs
. It comes with a small night light mode.
7. The high-altitude version is suitable for installation at a height of 8 meters
8. It comes with a built-in light sensor that can output light values.

Modbus Communication Protocol

Modbus Breathing Fluctuations and Human Movement Sensor Product Manual插图3
Modbus Breathing Fluctuations and Human Movement Sensor Product Manual插图4

Product Image

Modbus Breathing Fluctuations and Human Movement Sensor Product Manual插图5
Modbus Breathing Fluctuations and Human Movement Sensor Product Manual插图6
Modbus Breathing Fluctuations and Human Movement Sensor Product Manual插图7
Modbus Breathing Fluctuations and Human Movement Sensor Product Manual插图8
Related Tags
Put this resource to use in a real project?

Go to the Tool Center for message parsing, CRC verification and device debugging, or submit your requirements for selection and integration advice.

Engineer Membership

Turn this article into actionable debugging resources

After activation, you can use advanced message parsing, resource pack downloads, code examples, engineering cases and priority technical support, suitable for real project delivery.

Unlimited Advanced Tools
Resource & Code Packs
Complete Engineering Case Library
Priority Technical Support

Leave a Reply

Your email address will not be published. Required fields are marked *.