MODBUS DTU439S network serial port conversion module - RS485+RS232 ↔ TCP/MQTT/UDP/HTTP four channel parallel

freeFree Technical Resource

This content is free to read, suitable for basic learning and search traffic.

MODBUS DTU439S network serial port conversion module - RS485+RS232 ↔ TCP/MQTT/UDP/HTTP four channel parallel缩略图

Product Overview

MODBUS DTU439S (HADTU439S)is a powerful industrial grade network serial port conversion module that provides both RS485 and RS232 interfaces. It supports parallel conversion of serial port datato four network protocols: TCP, MQTT, UDP, and HTTP. Built in Modbus RTU ↔ The Modbus TCP transparent gateway function is the core bridge that connects traditional Modbus devices with Home Assistant and IoT cloud platforms.To four network protocols: TCP, MQTT, UDP, and HTTP. Built in Modbus RTU ↔ The Modbus TCP transparent gateway function is the core bridge that connects traditional Modbus devices with Home Assistant and IoT cloud platforms.

Four channel parallel architecture

ChannelProtocolApplicable scenarios
TCP Server/ClientTCP/IPSerial devices connected to Ethernet, upper computer software directly connected
MQTTMQTT v3.1.1connected to IoT platforms (HA/AWS IoT/Alibaba Cloud IoT)
UDPUDPLow Latency Broadcast Communication
HTTP ClientHTTP GET/POSTTrigger Webhook or REST API Call

Core Function

  • Dual Serial Ports: 1 RS485+1 RS232, Can Work Simultaneously
  • Modbus Gateway: Modbus RTU ↔ Modbus TCP bidirectional transparent conversion, HA Modbus TCP integration directly uses
  • MQTT bridging: serial data is automatically published to MQTT topics, HA receives
  • RST resetthrough MQTT integration: short press to restart the device, long press to restore factory settings (for easy debugging)
  • web configurationBuilt in web configuration page, allowing the browser to directly set parameters

HA integration

Recommended solution: Modbus RTU device → DTU439S (TCP mode) → Modbus TCP integration in HA. Just add Modbus TCP configuration in HA configuration.yaml, pointing to the IP+port of DTU439S.

Technical Specifications

  • Power supply: DC 5-36V wide voltage
  • Network: RJ45 10/100M
  • Serial port parameters: baud rate 2400-460800, data bits/checksum/stop bits can be set
  • Working temperature: -40~85 ° C
  • Installation: DIN rail

🛒 Purchase and Consultation

The MODBUS products introduced in this article can be purchased through official channels.

📍 Modbas Intelligence|12th Floor, Tower A, Langqing Plaza, Guanyin Bridge, Jiangbei, Chongqing, China
📞 Phone:+86-18801054468
📧 Email: iot@modbus.com | 🌐 Official website:www.modbus.cn
📱 Search for "Modbus Debugging Assistant" on WeChat Mini ProgramModbus Debugging Assistantto learn more about product information

Put this resource to use in a real project?

Go to the Tool Center for message parsing, CRC verification and device debugging, or submit your requirements for selection and integration advice.

Engineer Membership

Turn this article into actionable debugging resources

After activation, you can use advanced message parsing, resource pack downloads, code examples, engineering cases and priority technical support, suitable for real project delivery.

Unlimited Advanced Tools
Resource & Code Packs
Complete Engineering Case Library
Priority Technical Support

Leave a Reply

Your email address will not be published. Required fields are marked *.