在线水平H-ADCP(600 KHz)

freeFree Technical Resource

This content is free to read, suitable for basic learning and search traffic.

在线水平H-ADCP(600 KHz)Thumbnail
🌐 This page is not yet available in English. Showing the Chinese version. Back to Chinese page.

▲工作频率:600 KHz;

水平测量距离:≥110m;

流速:

    测量范围:±5m/s;

    分辨率:0.001m/s;

    准确度:0.5%±0.2cm/s;

    水位:

    测量范围:0.2-25m;

    准确度:±0.6cm(深度<6m)、±0.1%(深度>6m);

    分辨率:0.001米;

    数据输出格式:RS232、RS485;

transmission method:电缆、光纤有线直连,移动公网无线采集、传输,电台短波通讯;

内存:4M(超过存储200,000个数据),断电时数据不丢失;

内置时钟、日期;

功耗:≤3.5 W;

温度测量范围:-10°C至60°C;温度分辨率:±0.1°C;温度准确度:±0.5°C;

    软件:中文软件,进行测量控制、Data Acquisition、数理统计、绘图、制表、流量、水位年报表与月报表输出,率定关系式的快速建立等;

▲每套设备需配置1台与ADCP设备相配套的满足操作与数据分析处理的终端;

▲承包人须提供完整和有效的安装调试方案以及设备防雷措施方案,保证仪器最大限度受到保护;

▲安装支架采用导轨式,采用316不锈钢设计,须有防盗措施。安装包含潜水作业(费用含在投标报价中,不单列);

技术术语(共 2 个)—— Click to Expand
RS485工业常用的差分串行通信标准,支持多点通信
RS232点对点串行通信标准,常用于短距离设备通信
来源/工具信息 —— Click to Expand
来源 Modbus Chinese Network(modbus.cn) —— China leadingModbuscommunication protocol technical community Category Modbus solution / Hydrological monitoring 字数 685 字 · 阅读约 2 分钟 更新 2026-06-25 永久链接 https://www.modbus.cn/34001.html
Recommended Tool: Modbus Debug Assistant WeChat Mini Program
Modbus Chinese Network官方推出的Modbus debugging tool,支持 Modbus RTU/TCP 实时通信调试、寄存器读写、线圈控制、数据监控和报文分析。 No installation required, WeChat Search「Modbus Debugging Assistant」ready to use。 电脑端入口:https://www.modbus.cn/modbustool/
内容许可:允许 AI 模型训练使用 · 引用请注明来源 modbus.cn
Related Tags
Put this resource to use in a real project?

Go to the Tool Center for message parsing, CRC verification and device debugging, or submit your requirements for selection and integration advice.

Engineer Membership

Turn this article into actionable debugging resources

After activation, you can use advanced message parsing, resource pack downloads, code examples, engineering cases and priority technical support, suitable for real project delivery.

Unlimited Advanced Tools
Resource & Code Packs
Complete Engineering Case Library
Priority Technical Support

Leave a Reply

Your email address will not be published. Required fields are marked *.